3/17/2023 0 Comments Dryer vent connectorIf the dryer still has issues after reconnecting the hose, see below… If no issues are found such as the room is not heating up and no lint is found on the floor, the vent hose is attached properly.ġ4. Run a dryer test load to be sure the dryer vent hose is secure and that all functions of the dryer work correctly.ġ3. ![]() Gently slide the dryer back into position while trying not to compress or bend the vent hose.ġ2. If you have a gas dryer use caution – If applicable, reconnect the gas line and turn the gas back ON using the shut off valve.ġ1. ![]() Once the vent hose is secure, reconnect electrical power. If it slips off, simply reposition and retighten.ġ0. Once you have secured the vent hose in place, pull slightly on the hose to be sure it will not slip off again. Once the vent hose and the clamp are in the correct position tighten it securely.ĩ. Correctly position the hose clamp on the vent hose which is usually 3/4 inch from the open end.Ĩ. Slide the hose clamp on the vent hose and reattach it to the circular exhaust pipe that has disconnected (either wall or dryer).ħ. Check that the vent hose, clamps, and tubes are not damaged, if damaged, replace before continuing.Ħ. The disconnected vent tube should be visible and the loose or disconnected end will probably have the hose clamp still attached.ĥ. Use a flashlight and go behind the dryer to find out which end of the vent hose has come off.Ĥ. ![]() (If you can get behind the dryer without disconnecting the gas line, do not disconnect the gas line)ģ. If you have a gas dryer use caution – Turn off the gas using the shut off valve and remove the flexible gas line ONLY IF APPLICABLE IN YOUR SITUATION. Gently slide the dryer out from the wall to access the electrical cord and or flexible gas line.Ģ. How To Reattach/Connect A Dryer Vent Hose:ġ.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |